It will work the issue is how the parts fit together. You need to be sure the heat sinks on the new GPU aren't designed for a different layout of motherboard otherwise you can heat fry something ( I fried my last PC's southbridge with a 6950's heat sink because the motherboard was never intended to house a 6950).
1 x PCI Express x16 slot, running at x16 (PCIEX16) (Note 3) 1 x PCI Express x16 slot, running at x4 (PCIEX4) 3 x PCI Express x1 slots (All PCI Express slots conform to the PCI Express 2.0 standard.) 2 x PCI slots
First and foremost we will need to know your Power Supply Unit. Assuming it is adequate enough to run it, then yes. Though as a general rule, if you have a card from the same generation it should be able to run one of it's siblings providing you have the power to support it. In addition, you need to see if your tower has the room to support the card.
Due to frequent travel in my youth, English isn't something I consider my primary language (and thus I obtained quirky ways of writing). German and French were always easier for me despite my family being U.S. citizens for over a century. Spanish I learned as a requirement in school, Japanese and Korean I acquired for my youthful desire of anime and gaming (and also work now). I only debate in English to help me work with it (and limit things). In addition, I'm not smart enough to remain fluent in everything and typically need exposure to get in the groove of things again if I haven't heard it in a while. If you understand Mandarin, I know a little, but it has actually been a challenge and could use some help.
Also, I thoroughly enjoy debates and have accounts on over a dozen sites for this. If you wish to engage in such, please put effort in a post and provide sources -- I will then do the same with what I already wrote (if I didn't) as well as with my responses to your own. Expanding my information on a subject makes my stance either change or strengthen the next time I speak of it or write a thesis. Allow me to thank you sincerely for your time.
Exactly which power supply is it? I'm guessing that you got a Corsair CX600 V2, but given your history of trying to find cheap junk parts, I'd like to know for certain.
The case should have ample airflow, as a Radeon HD 7850 doesn't put out that much heat. The real concern is whether the card will physically fit.
Exactly which power supply is it? I'm guessing that you got a Corsair CX600 V2, but given your history of trying to find cheap junk parts, I'd like to know for certain.
The case should have ample airflow, as a Radeon HD 7850 doesn't put out that much heat. The real concern is whether the card will physically fit.
I think it should fit, got this picture off google. That person has a messy setup though :P.
Exactly which power supply is it? I'm guessing that you got a Corsair CX600 V2, but given your history of trying to find cheap junk parts, I'd like to know for certain.
The case should have ample airflow, as a Radeon HD 7850 doesn't put out that much heat. The real concern is whether the card will physically fit.
That power supply will support a Radeon HD 7850 without incident. The case will probably be fine, too, though you may want to pull out a ruler and measure. If you've got room in the case for a 26 cm long video card, you'll be fine, as I'd be surprised if any 7850 goes over that.
Comments
It will work the issue is how the parts fit together. You need to be sure the heat sinks on the new GPU aren't designed for a different layout of motherboard otherwise you can heat fry something ( I fried my last PC's southbridge with a 6950's heat sink because the motherboard was never intended to house a 6950).
Expansion Slots
1 x PCI Express x16 slot, running at x16 (PCIEX16) (Note 3)
1 x PCI Express x16 slot, running at x4 (PCIEX4)
3 x PCI Express x1 slots
(All PCI Express slots conform to the PCI Express 2.0 standard.)
2 x PCI slots
First and foremost we will need to know your Power Supply Unit. Assuming it is adequate enough to run it, then yes. Though as a general rule, if you have a card from the same generation it should be able to run one of it's siblings providing you have the power to support it. In addition, you need to see if your tower has the room to support the card.
I recently upgraded my psu to a 600w corsair psu, will this be suitable?
My case: http://www.ebuyer.com/343262-cit-vantage-gaming-case-black-hd-audio-black-interior-4-fans-card-cscitvan
Exactly which power supply is it? I'm guessing that you got a Corsair CX600 V2, but given your history of trying to find cheap junk parts, I'd like to know for certain.
The case should have ample airflow, as a Radeon HD 7850 doesn't put out that much heat. The real concern is whether the card will physically fit.
I think it should fit, got this picture off google. That person has a messy setup though :P.
<InvalidTag type="text/javascript" src="http://www.gamebreaker.tv/cce/e.js"></script><div class="cce_pane" content-slug="which-world-of-warcraft-villain-are-you" ctype="quiz" d="http://www.gamebreaker.tv"></div>;
http://www.ebuyer.com/269259-corsair-600w-cx-series-v2-psu-6x-sata-2x-pci-e-cmpsu-600cxv2uk
PSU
Owning a 7870-Tahiti LE I can say that it runs very well on my 760G motherboard! ;D of course it will work for you on the 970G without a doubt.
;D << Boasts his card way to often